Kinetronics Static-Wisk SW-060 anti-static brushes

Kinetronics Static-Wisk cleaning brushes are particularly suitable for cleaning sensitive surfaces while simultaneously dissipating any static charge. The smaller brushes are ideal for removing dust from films or lenses without damaging the coating. Larger surfaces such as frame glass, scanner glass, monitors, acrylic surfaces or plastic surfaces can be cleaned of dust and lint with the larger brushes. Width 60 mm

Kinetronics anti-static brushes are the ideal solution for dust control in many areas of technology, optics and industry. For example, they clean the surfaces of films and remove electrical charges from film strips. They effectively remove dust from expensive lenses without risking scratches to the coating. The larger brushes are also ideal for removing dust and electrical charges from glass panes, plastic surfaces, etc. The image, film or printing plate is thus dust-free and statically neutralised. This means that they become dirty much more slowly, as there is no electrical charge to attract dust again.

Kinetronics antistatic brushes consist of a mixture of natural and synthetic fibres, which are permanently set in a conductive plastic handle. If the brushes become dirty, they can be washed with a mild shampoo. After washing, the fibres should be combed and left to dry overnight on a flat surface. The antistatic properties of the brushes are not affected by cleaning. The brushes cannot be used at temperatures above 65 degrees Celsius. Kinetronics antistatic brushes are available in six different lengths (see photos). We also supply the 100, 140 and 280 millimetre wide brushes with an additional grounding connection. This is advantageous in cases of extreme, recurring electrical charges.