CINESTILL T6 TungstenChrome first developer for 8-16 films for 2000 ml

Take pictures under artificial light without sacrificing 2 exposure stops of colour filtering! The technical data sheet published by Kodak recommends exposing E100 at EI 25 with an 80A filter in tungsten light (3200 K). Expose at box speed in low light or even push to EI 200 or 400 and let your slides appear in colour during processing. This requires colour filtering and compensation of 2-4 f-stops in conventional E-6 processing.

The cold first developer for the Cinestill 3-bath process.

Ideal for compensating the colour cast of artificial light bulbs on daylight film.

For Ektachrome®, E-100, E-6 compatible film for colour matching. The ‘TungstenChrome’ cool tone 3200K 1. Developer renders approx. 6+ f-stops of usable dynamic range* with purer whites and moderately enhanced colour saturation. Single use 1+1 dilution develops 8-16 rolls or 100 feet of Ektachrome®. Shelf life in tightly stoppered, airtight bottles is approximately 8-24 weeks.

For tungsten/cool tone development: 1+1 dilution ~ 6min @ 40°C (108°F) loading temperature

Push +1 (underexposed film): do not dilute ~ 6 min or at 1+1 8 min @ 40°C filling temperature

Push +2 (severely underexposed film): do not dilute ~ 8 min @ 40°C filling temperature

Consisting of Part A (powder). Fill up to 1,000ml.

In the ‘one shot’ application 1+1.

Sufficient for approx. 8-16 films.

Shelf life in highly filled, airtight bottles approx. 8-24 weeks.

For a complete process you need:

- A first developer of your choice (Dynamic Chrome, Tungsten Chrome or Daylight Chrome)

- The combined reversal second developer (Cr6)

- Bleach fix with built-in conditioner (Bf6)

We also offer the process as a kit.

Intended for use with the 2-in-1 Cr6 ‘Color&Reversal’ slide solution and the 3-in-1 Bf6 ‘Bleaches&Fixer’ slide solution. Cs6 ‘Creative Slide’ 3-bath kits are also available here

The Cs6 ‘Creative Slide’ 3-bath process makes complicated chemistry easy by simplifying the alchemy! The number of processing baths for E6 film is reduced from 6 to 3. The reversal step occurs during colour development in a Color&Reversal bath, and the bleaching and conditioning steps are combined with the fixing step in a Bleaches&Fixer bath. Colour timing is done with alternative 1st Developers to get full creative control over your slides.

CHARACTERISTICS:

Tungsten balanced 3200K for tungsten or cold light slides. E100

1000ml stock solution yields 2000ml working solution (diluted 1+1 with water)

The single-use solution has a capacity of 8-16 rolls (135/120), 32-64 sheets (4x5) or 100 feet (35mm) of film.

Approximately 6+ stops of usable dynamic range*

Vivid colour reproduction

Low D-min for brighter whites and cleaner highlights

Slightly increased colour saturation

Push process with dilutions and development times of 6-8 minutes

Image archiving for at least 80 years

Easily miscible powder concentrate