CineStill Film JOBO MONO Film Development Kit

With the JOBO MONO film development kit, CineStill combines its proven Df96 B&W monobath with JOBO film development tools to provide simple, straightforward film development that everyone can enjoy.

Film development set consists of:

JOBO 1510 Daylight Developing Tank with Spool.

The JOBO 1510 Daylight Developing Tank holds a 1501 multi-format spool of 35mm film. It uses less chemistry than most other tanks, requiring only 140ml of chemistry when the tank is placed on its side and rolled back and forth (rotary development), or 250ml of chemistry when intermittently stirred by turning it over completely (tilt development).

- Retrofittable to the rotation tank
- Membrane cap for pressure compensation
- Unbreakable plastic
- Film capacity: 1x 135
- Filling capacity: tilting 250 ml, rotation 140 ml
- Scope of delivery: tank complete with 1 spiral 1501

CINESTILL DF 96 B&W Developer Fix Monobath Single-Step Solution for 16 Films

• Ready-to-use processing for traditional B&W film in 1 bath
• Room temperature processing 21-27°C
• Worlds fastest process at 27°C in just 3min!
• Instructions for processing at any room temperature included
• Temp. tolerance is 1°C
• Push/Pull processing by adjusting temp. 6°C
• Reusable, all-in-one solution.
• Processes over 16+ rolls of film
• Process 1-8 rolls at a time
• Extremely versatile self-completing process
• No special processor needed (use standard processing tanks and reels)
• Fully archival (following the processing instructions below)
• Odor-free (unlike home concoctions or old formulations)
• Economical!

Developing black and white film just got a whole lot simpler with the CineStill Df96 Monobath. The worries of too much development, dilution, time or agitation are gone. Stop bath? Fixer? Hardener? Gone the way of One-Hour-Photos and formaldehyde. Finally, foolproof at home film processing.

Many of the pitfalls and hazards of a multi-bath process are eliminated with this ready-to-use single-step solution, such as improper dilution, over-agitation, bubble marks, surge marks, etc. Over-processing is impossible, because the fixing action overtakes chemical development while aiding physical development, creating better image uniformity and finer grain negatives.

Monobath solutions were first proposed as far back as 1889, but only recently have the difficulties associated with their formulation been possible to overcome. The main problem has been the loss of emulsion speed that results when the exposed silver halide is dissolved by the fixation process before development can take place. Our monobath is unlike home concoctions or old technology that failed years ago. Df96 uses a more effective processing technology (akin to D96 motion picture developer) that buffers fixing, and archival fixing agents that are more solvent and aid in breaking down the silver and redepositing it, to achieve crisp uniform grain and wide development latitude.

Fully Archival Processing:
Df96 uses one of the the most effective archival fixing agents and will produce fully archival negatives in 3-6 min, with proper care. Extending processing time to ensure full removal (fixing) of undeveloped silver halide will not affect development. Washing time after Df96 processing is exceedingly rapid because the solution is alkaline. Five minutes of washing is sufficient to achieve archival standards. This self-terminating process is fully archival, and it boosts shadow development while terminating highlights from over-processing.

Easy to Use:
If you have a processing tank and know the room temperature, you’ve got everything you need to start developing CineStill BwXX or any other black and white film at home. Just determine the temperature of the ready-to-use solution, choose the recommended time/agitation combination on the label, and pour.

Cost Effective:
1L of reusable monobath solution will easily develop 16+ rolls of film. Simply pour the used chemistry back into the bottle and add 15 seconds for each roll previously processed.

Native ISO development:
27°C for at least 3min • Constant agitation
24°C for at least 4min. • Intermittent agitation
21°C for at least 6min. • Minimal agitation
*Below 20°C renders pulled contrast negatives

Push development:
30°C for at least 4 min • Intermittent agitation

Funnel with stainless steel filter

Durable plastic funnel with built-in stainless steel sieve to filter out particles from the film developing solution.

Wide-neck laboratory bottle 1000 ml white

These bottles are especially convenient for storing preparation liquids as they are easy to fill due to the large opening. They are made of multi-walled plastic, which makes them almost impervious to almost all chemicals and air. The closures keep a good seal.