ADOX Colortec RA-4 Print Kit 2.5 Liter

New colour development set with only one part per bath. You only have to dilute the developer and the bleach bath 1+4 each and you're ready to go.

This developer and bleach fixer kit contains everything you need to processcolor papers in the RA4 compatible process. Nowadays all color papers are compatible to the RA-4 process (e.g. ADOX, Kodak and Fuji). The content is sufficient for processing approx. 5 sqm paper or approx. 160 sheets 18x24 cm. Of course, you don't always have to prepare 2.5 litres at once. The processing should take place at 35 degrees Celsius. The development and fixing time is then 45 seconds each. After 2 square meters of paper have been processed per litre, the bath should be disposed of and new chemicals applied. If the process is continued, colour shifts, blue blacks (exhausted developer) or occupied lights (exhausted bleach-fixing bath) will occur at some point. As with all bleach-fixing baths, the watering temperature should not be below 30 degrees Celsius or a stabi bath should be used, otherwise the reddish colour of the bath may not be completely washed out and the pictures may have a red cast. It is therefore also important to use only well-watered test strips to assess the colour filtering.